available (2-5 days)
approx. $105.00 (tax free)
Medieval Madness (Remake) | 2016
The Next Generation Playfield Protector is made of Vivak (PET-G), which allows us to reduce thickness and improve the edges by using CNC lasers instead of CNC molding cutters. The new surface is now even more transparent while still being glossy.
Our playfield protectors are precut protectors, which fit individually to each pinball machine type.
Forget about mylar, which offers just a partial protection and can be very, very hard to be removed without damaging your precious playfield.
Forget about clearcoating – clearcoating is, if correctly done, a long term project. Your pinball machine is out of service for several months. You have to level your inserts and still there can be air between the insert and the clearcoat which can result in unwanted „intransparent“ areas. And clearcoating is no protection to avoid dimples!
Depending on the particular pinball machine, a protector can be installed within a few hours including cleaning, which should be done in parallel. The playfield needs to be partially stripped down, so that the protector can be easily placed on the playfield.
Individually adapted for specific pinball machine types
Long time protection
Balls roll smoother
Protectors reduces unevenness (i.e. unlevelled inserts)
NEW Vivak Material (PET-G)
NEW now only 0.6mm (0.02‘‘) thickness
NEW even less visible
NEW less adjusting of swittches etc.
NEW no swarf
Included in delivery: 1 Pieces