Avengers: Infinity Quest (Premium) | 2020
The Next Generation Playfield Protector is made of Vivak (PET-G), which allows us to reduce thickness and improve the edges by using CNC lasers instead of CNC molding cutters. The new surface is now even more transparent while still being glossy.
Our playfield protectors are precut protectors, which fit individually to each pinball machine type.
Forget about mylar, which offers just a partial protection and can be very, very hard to be removed without damaging your precious playfield.
Forget about clearcoating - clearcoating is, if correctly done, a long term project. Your pinball machine is out of service for several months. You have to level your inserts and still there can be air between the insert and the clearcoat which can result in unwanted „intransparent“ areas. And clearcoating is no protection to avoid dimples!
Depending on the particular pinball machine, a protector can be installed within a few hours including cleaning, which should be done in parallel. The playfield needs to be partially stripped down, so that the protector can be easily placed on the playfield.
Individually adapted for specific pinball machine types
Brilliant look
Quick Installation
Long time protection
Balls roll smoother
Protectors reduces unevenness (i.e. unlevelled inserts)
NEW Vivak Material (PET-G)
NEW now only 0.6mm (0.02‘‘) thickness
NEW even less visible
NEW less adjusting of swittches etc.
NEW no swarf
Product Safety Notice for Playfield Protectors
1. Product Description
Our Playfield Protectors are made from high-quality Vivak® sheet material (PETG). They provide optimal protection for pinball machine playfields, prevent wear and damage, and are intended for indoor use. The material is characterized by high transparency, impact resistance, and durability.
2. Safety Instructions
Please follow these instructions to ensure the safe use and longevity of the protectors:
- Installation requires the removal of certain parts from the playfield, such as flipper fingers, ramps, and plastic components. Follow the included installation instructions.
- Thoroughly clean the playfield before installation. The playfield must be dry before the protector is installed.
- The protector should move slightly after installation. If adjustments are necessary, use sharp scissors or an appropriate tool.
- The protector is designed exclusively for use in pinball machines.
- Do not expose the protector to direct sunlight or temperatures above 60 °C, as this may cause deformation.
- Do not bend or fold the protector during installation to avoid damage.
- Clean the protector with mild, non-abrasive cleaning agents and a soft cloth.
- Avoid contact with aggressive chemicals such as solvents, alcohol, or acetone.
- Use new silicone rubber rings to minimize abrasion and keep the playfield clean for longer.
- Use new balls. Clean them with a dry cloth before use to remove residues such as oil.
3. Disposal
The protectors are made from recyclable PETG material. Dispose of damaged or no longer needed protectors according to local regulations for plastic waste. Avoid disposing of them in the environment.
4. Warnings
- Improper installation or use may cause damage to the product or the pinball machine.
- The protector is not suitable for load-bearing or safety-critical purposes.
- Damage caused by incorrect installation is not covered under warranty.
5. Manufacturer Details
Manufacturer: Playfield Protectors – SS Trading LLC
Contact: sales@playfield-protectors.com
Material Source: Vivak® sheets, manufactured by thyssenkrupp Plastics GmbH.
6. Returns and Exchanges
Returns and exchanges are possible under certain conditions. Please contact our support team for more information.
7. Customer Service
If you have any questions or issues, we are happy to assist you.
Contact us at:support@playfield-protectors.com
Included in delivery: 1 Pieces